Category Archives: System “Warm floor”

Heating element instructions, cable that does not require a tie.

Укладка греющего кабеля в слой плиточного клея. Подобрать систему электрообогрева соответствующую вашим требованиям по мощности и тепловому обеспечению помогут специалисты нашей компании. а наша монтажная группа произведёт правильную укладку, according to the instructions for installing the heating element. Before laying the cable, a wiring plan must be drawn up., where the heated areas will be marked, cold wires, as well as the location of the temperature sensor and

More details

Film infrared heated floor

Film infrared heated floor Buy film infrared heated floor in Saratov from the manufacturer in the TeploKhimMash company. The basis of the film underfloor heating – thermal film, which is a set of heating carbon strips, connected by a copper-servo bus, and sealed in plastic wrap. Thermal film is a new generation heating system, an example of the successful application of nanotechnology. 90,4% thermal film radiation consists of far infrared rays

More details

Underfloor heating

Греющий кабель для пола К покупке греющего кабеля для обогрева помещений ( Warm floor ), must be approached responsibly, after all, cable heating is done for more than one year, but for several years. LLC specialists ” NPO TeploKhimMash ” Saratov will help you choose the optimal heating cable for heating the room, and our installation team will install the heating cable.

More details

Installation instructions for infrared foil floor

Instructions for installing thermal film for floor heating, ceiling, roofing, walls, pipes. The floor surface must be level, without visible, tangible projections, hollows, garbage. To direct heat in the right direction, it is recommended to use heat-reflecting material on mylar, polypropylene, cork or other exclusively non-metallized base with a thickness 3-6 mm. When laying a top coat of carpet or linoleum, в качестве подложки

More details

Underfloor heating floor

Как устроена система пленочного теплого пола? Теплый пол в виде пленки устроен довольно сложно, в домашних условиях такую систему не изготовишь. Нагревательным элементом служит уникальная наноструктура, выполненная из углеродных материалов, в которых атомы углерода образуют гексагональную решетку. Этот материал обладает способностью генерировать невидимое человеческому глазу инфракрасное излучение. Нагревательным элементов инфракрасного теплого пола служит гексагональная улеродная

More details

Тёплые полы в слой плиточного клея

Нагревательные маты в слой плиточного клея. В случае, когда возможность сделать стяжку отсутствует, либо она уже сделана, а теплые полы всё же требуется установить, мы предлагаем установить FH—маты, представляющие собой нагревательный кабель толщиной 2- 3,1 мм закрепленный на стекловолоконной сетке, предназначенные для укладки непосредственно под напольное покрытие, в слой плиточного клея. FH – маты предназначены

More details

CALL ME
+
Call me!

ООО "ТеплоХимМаш"